Sanitary Butterfly Valves

Home > Products > Sanitary Fittings & Valves > Sanitary Valves > Sanitary Butterfly Valves

Sanitary Butterfly Valves

 
Sanitary Butterfly Valves

Material :

Body : SS 304, SS 316 or SS 316L (cast or forged)

 

Handle :

* SS3 04 Solid bar with phenolic knob for 4 position

 

* Nylon 6 + reinforce glass fiber handle with SS 304

 

gripper bar

 

*or all SS 304 handle for 12 position

Seat : Silicone, EPDM and Viton is available

Operation :

Available for pull handle 4 position and gripper handle

   

12 position

Range of control systems :

Available for air actuators, micro switches, solenoids...etc

Size :

Usually 1" - 4", any size is demandable

Fitting ends :

BS, DIN, SMS, 3A, Weld ends, Male ends and Clamp ends

Working pressure :

* -0.9 to 10 Bar for cast body

* -0.9 to 20 Bar for forged body

Working temperature :

-10oC up to 150oC

Disk head size :

* 9.4 x 9.4mm available for cast & forged body

* 8 x 12mm, 12 x 12mm available for forged body

Safety :

100% 6kgf/cm2 air or 25kgf/cm2 hydraulic and

   

300k times cycle test

 

Actuator

Sanitary Butterfly Valves
NO. PART NAME MATERIAL
1 KNOB PLASTIC
2 SHAFT-BAR SS304
3 SPRING SS304
4 HOLDER SS304
5 BODY SS304, 316, 316L
6 DISC SS304, 316, 316L
7 GASKET SILICON, EPDM
8 BOLT SS304
Sanitary Butterfly Valves

Weld End

Clamp End

Male Part End

Sanitary Butterfly Valves Sanitary Butterfly Valves Sanitary Butterfly Valves
A B C D F
Size Weld Clamp Male W/C/M W/C/M
1" 47 80 122.24 73 22 223
1.5" 47 80 134.94 73 22 238
2" 52 80 163.51 92 22 245
2.5" 54 80 174.63 111 22 247
3" 62 90 195.26 123 24 254
4" 80 100 228.60 161.5 24 271
 

Handles For Butterfly Valve

 

Pull Handle 4 Position

Pull Handle 4 Position

Material :

SS 304 solid bar with phenolic knob.

Disc head size :

9.4 x 9.4mm, 12 x 8mm or 12 x 12mm available.

Feature :

* Full machined and polished.

 

* Easy operation and safe lock.

 

Gripper Handle 12 Position

Gripper Handle 12 Position

Material :

1. Nylon 6 + reinforce glass fiber handle with

SS 304 gripper bar and notch plate.

2. All SS 304 handle, gripper bar and notch plate.

Disc head size :

9.4 x 9.4mm, 12 x 8mm or 12 x 12mm available.

Feature :

* Precision and beautiful design.

 

* Easy operation and safe lock.

 

* Easy to put your logo marks on.

No.66, Lane 126, Sec. 2, Shi-Twen Rd., Taichung 40749, Taiwan, R.O.C.
Tel : 886-4-23112576
Fax : 886-4-23112578
Contact person : Sandy Wang
E-mail: fitting@fittings.com.tw
http://www.pipefittingweb.com/
SKYPE: wellgrowindustries