EN1092-1 Flanges

Home > Products > Flanges > EN1092-1 Flanges

EN1092-1 Flanges
Material : 1. Stainless Steel ASTM/ASME A/SA182 F304, F304L, F316, F316L, ASTM/ASME A/SA351 CF8, CF3, CF8M,
CF3M, DIN1.4301, DIN1.4306, DIN1.4401, DIN1.4404, DIN1.4308, DIN1.4408, DIN1.4306, DIN1.4409
2. Carbon Steel ASTM/ASME A/SA105 A/SA105N & A/SA216-WCB, DIN1.0402, DIN1.0460, DIN1.0619
Dimension : EN 1092-1
Size : DN10 ~ DN4000
Pressure : PN2.5, PN6, PN10, PN16, PN25, PN40, PN63, PN100, PN160, PN250, PN320, PN400
Type No. : Type 01 Plate Flange (slip on) for Welding, Type 02 Loose Plate Flanges with Weld On Plate Collar or for lapped pipe end, Type 04 Loose Plate Flanges with Weld Neck Collar, Type 05 Blind Flange, Type 11 Weld Neck Flange, Type 12 Hubbed Slip On Flanges for Welding, Type 13 Hubbed Threaded Flanges, Type 21 Integral Flange, Type 32 Weld on Plate Collar, Type 33 Lapped Pipe End, Type 34 Weld neck Collar, Type 35 Welding Neck, Type 36 Pressed collar with long neck, Type 37 Pressed Collar
Face Type : A - Flat Face (FF), B - Raised Face (RF), C - Tongue, D - Groove, E - Spigot, F - Recess, G - O-ring spigot,
H - O’ring groove
Coating : Anti-rust Paint, Oil Black Paint, Yellow Transparent, Zinc Plated, Cold and Hot Dip Galvanize
EN1092-1 Flanges
Plate Flange for Welding
EN1092-1 Flanges
Loose Plate Flange
EN1092-1 Flanges
Loose Plate Flange with Weld Neck collar
EN1092-1 Flanges
Blind Flange
EN1092-1 Flanges
Weld Neck Flange)
EN1092-1 Flanges
Hubbed Slip-On Flange for Welding
EN1092-1 Flanges
Hubbed Threaded Flange
EN1092-1 Flanges
Integral Flange
No.66, Lane 126, Sec. 2, Shi-Twen Rd., Taichung 40749, Taiwan, R.O.C.
Tel : 886-4-23112576
Fax : 886-4-23112578
Contact person : Sandy Wang
E-mail: fitting@fittings.com.tw
http://www.pipefittingweb.com/
SKYPE: wellgrowindustries